Wood shredder should pay attention to daily cleaning and maintenance

2018-05-11

1. The wood shredder should be started under the empty load, and then run empty for 2 to 3 minutes. Observe that the machine has no abnormal conditions before feeding. Feed as evenly as possible, and make the motor work under the rated load, observe the bearing temperature can not be too high, if there is overheating should stop checking, so as not to damage the bearings, spindles and so on.
2. Select the suitable motor according to the specified matching power, and strictly select the speed of the matching power according to the rated speed of the spindle of the model shredder, and must not increase the speed of the spindle. The high-speed operation of the shredder often brings great disadvantages.
3. Do a good job of inspection and replacement of the wearing parts in the wood shredding equipment. Replace the good blades regularly. At the same time, we must pay attention to the capping screws tightening. If loose, you need to tighten them in time and subtract the equipment. During operation, therefore, a malfunction occurs.
4. The use of wood shredder temperature rise is a problem that requires the attention of users. It is necessary to check the problems and stop them in time if they find a problem. Otherwise, it will have a great impact on the equipment. When the user operates the wood shredding machine, in addition to the need to do these maintenances work, the correct operation of the equipment is also very critical.


Copyright © 2002-2011 DEDE58.COM SHUGUANG MACHINERY Design by Shuguang Heavy Machinery

Add:No.19,Longjiang west road,Shangjie district,Zhengzhou City,Henan China Telephone:0086-371-67666667

Friend link:UIC standard rail vertical roller mill China Forklift Truck Agents grinding mill