The smoothness and sealing of jaw crusher bearing

2020-05-15

The roller bearing of jaw crusher is smooth with rolling bearing grease. It is necessary to make sure that there is an elastic hydrodynamic film between the rolling surfaces of the bearings. The roller bearing grease is composed of 80% ~ 90% mineral grease. The oil-bearing soap base does not play a leading role in the process of practical smoothing. The rolling roller bearing of jaw crusher is smooth, and the viscosity of required mineral fat is at least 5-10e (under normal operating temperature). On the other hand, when the smooth grease is smooth, part of the elastic hydrodynamic film will inevitably appear, so it is suitable to increase the limit pressure resistant agent in the smooth grease. Because of its special function, it can avoid the damage of the rolling surface even under the bad working conditions. When the elastic dynamic film is smooth, the extra service life will be improved by 100%.
 
Together, the grease is used to protect the surface of the rolling bearing from corrosion. Therefore, it is necessary to be able to absorb condensed water. Water soluble sodium soap based smooth grease can be selected, and its increase is usually related to water content. It is necessary to note that the water dissolved in the smooth grease can harm the smooth ability. In the same way, if different kinds of oil, especially the oil with different saponification effect, are mixed together, the quality of oil will generally deteriorate, and the quality of blended smooth grease is worse than that of original smooth grease.
 
The temperature rise of swing roller bearing of jaw crusher is related to the method of producing waste grease. Therefore, the space left in the vicinity of the bearing should not be too narrow, which should be the width of the bearing, especially in the cold season, the starting torque will not be too high. The use of automatic smoothing equipment, continuous or short intermittent supply of smooth grease to the bearing, safe and reliable operation, and is not affected by the fine condition of the protection personnel. In addition, the smooth grease input from the hole on the outer ring has the best effect.
 
Considering the thermal expansion of the shaft and the axial open space tolerance of swing roller bearing, it is necessary to ensure that there is enough axial open space when selecting labyrinth sealing equipment. As a fine seal, especially to avoid water intrusion, V-ring should be selected.
 
As a supplier with nearly 30 years' manufacturing, Shuguang Heavy Machinery also produces and sells hammer crushers, impact crushers, vertical shaft crushers, cone crushers, compound crushers, Raymond mills, high pressure mills. Powder machine, vertical mill, ultra-fine grinding machine, ball mill, double-shaft shredder and other heavy equipment crusher. Feel free to contact us for more details.
 
Factory Address: Longjiang West Road, Shangjie District, Zhengzhou City
Contact number: +86-371-67666660 676667
Mobile phone: 0086 13523465141
After-sales Service Department: 0371-67666667



Copyright © 2002-2011 DEDE58.COM SHUGUANG MACHINERY Design by Shuguang Heavy Machinery

Add:No.19,Longjiang west road,Shangjie district,Zhengzhou City,Henan China Telephone:0086-371-67666667

Friend link:UIC standard rail vertical roller mill China Forklift Truck Agents grinding mill Rajgira Ladoo Machine sla 3d printer