After our company's recent return visit to users, some users reported that the jaw crusher would suddenly shut down in the process of operation, causing them some losses, which also became a headache for users. What is the reason for the sudden shutdown of jaw crusher in use? This article will explain in detail.
In view of this problem, our company has carried out a comprehensive investigation report on the users. According to the customer's response, the causes of jaw crusher shutdown can be roughly pided into the following six types:
1. The discharge port of crusher is blocked, resulting in full cavity blocking;
2. The V-belt driven by the groove wheel of the crusher is too loose, causing the belt to slip;
3. The fastening bush of the eccentric shaft of the crusher is loose, which causes no gap between the two sides of the bearing seat of the frame, so that the eccentric shaft is stuck and cannot rotate;
4. The working site voltage is too low, and the main engine cannot be broken after encountering large materials;
5. The bearing of crusher is damaged.
The technicians made corresponding solutions to the problems found:
1. Remove the blockage at the discharge port of crusher to ensure smooth discharge;
2. Tighten or replace the V-belt;
3. Reinstall or replace the tightening bush;
4. Adjust the voltage of the working site to meet the requirements of the working voltage of the main engine;
5. Replace the crusher bearing.
As a supplier with nearly 30 years' manufacturing, Shuguang Heavy Machinery also produces and sells hammer crushers, impact crushers, vertical shaft crushers, cone crushers, compound crushers, Raymond mills, high pressure mills. Powder machine, vertical mill, ultra-fine grinding machine, ball mill, double-shaft shredder and other heavy equipment crusher. Feel free to contact us for more details.
Factory Address: Longjiang West Road, Shangjie District, Zhengzhou City
Contact number: +86-371-67666660 676667
Mobile phone: 0086 13523465141
After-sales Service Department: 0371-67666667
